Erucamide is a high-performance fatty acid amide widely applied in polymer processing, plastics, coatings and daily chemical industries. As an excellent slip agent and anti-blocking agent, it is commonly added to polyolefin films, plastic sheets and molded products to reduce surface friction, improve smoothness and prevent adhesion between stacked materials during production and storage. It also serves as a lubricant and dispersant in plastic masterbatch, rubber and synthetic resin, enhancing processing fluidity and product surface gloss. In ink and coating formulations, it improves leveling and abrasion resistance. Compared with other similar amides, erucamide features low volatility, long service life and good thermal stability, suitable for high-temperature processing environments. It is also used in textile finishing agents and cosmetic additives. Due to its non-toxic property, it can be applied to food-contact plastic materials, becoming a universal auxiliary in modern polymer industry.

GHS Classification: Not classified as hazardous under normal use Hazard Statements: None assigned This compound has extremely low acute toxicity, with oral LD50 in rats far above 5000 mg/kg. Under routine handling, it rarely causes obvious irritation. Direct long-term skin contact with molten product may lead to mild dryness or slight irritation; contact with eyes may cause temporary discomfort and foreign body sensation. Inhalation of fine dust or hot vapor at high temperature may mildly irritate the respiratory tract and cause slight cough. No evidence of carcinogenicity, mutagenicity or reproductive toxicity has been found. Follow standard industrial protection rules during operation: wear ordinary dust-proof gloves and safety goggles, and maintain good ventilation. In case of skin contact, clean with warm water and soap. If entering eyes, rinse continuously with running water for 15 minutes. Store separately from strong acids and oxidants. Dispose of waste in accordance with local environmental regulations.